Reparing APC UPS
[adrotate banner=”2″]
I’ve spent 15 USD x 2 = 30 USD to repair my APC Back-UPS RS-800. I no need to spend more time and more petrol sending the UPS to their service center for repair.
Why I choose this model ? Because this model could have longer time and do have the function to shutdown my PC before run out of the battery. I’ve been using for 3 years without problem, you just need to change the battery every 2 years, like changing your vehicle battery. You no need to buy a new one if you know this simple way to repair your UPS.
I’ve repaired the on last few months ago – Reparing Backup UPS – ES 500
[adrotate banner=”1″]
ISO 280 f/2 1/100sec
Unplug and take out your UPS carefully.
ISO 640 f/2 1/100sec
ISO 110 f/2 1/100sec
Follow the instruction that how to open the UPS from the bottom and the cable.
ISO 250 f/2 1/100sec
Turn the UPS down, and you can see the side that can be opened.
ISO 400 f/2 1/100sec
Drag out the battery from the bottom.
ISO 320 f/2 1/100sec
The battery Swollen, it is dangerous maybe explode if you continue charging it.
ISO 400 f/2 1/100sec
The UPS container two 12V 7.2Ah battery, that’s why could have longer time.
ISO 500 f/2 1/100sec
This is the cable for the UPS to the batteries.
ISO 220 f/2 1/100sec
The place to plug in the cable.
ISO 200 f/2 1/100sec
Voltage for the UPS.
ISO 1100 f/2 1/100sec
Watch out the Voltage and Ah before buy a new one.
ISO 1100 f/2 1/100sec
Bought 2 with 12V but in 7Ah, it is same and can be used. Make sure the size is same. It cost 15 USD for each battery.
ISO 720 f/2 1/100sec
This is the old one, it is in very dangerous condition, many people never check it and and don’t know that they put a bomb inside their room.
ISO 500 f/2 1/100sec
Unplug the cable and re-plug to the new one.
ISO 500 f/2 1/100sec
Put back the sticker, the sticker could help you inside to UPS easily.
ISO 360 f/2 1/100sec
Do not plugin the cable before the battery insert correctly.
ISO 400 f/2 1/100sec
Plug in the cable after the batteries inserted.
ISO 320 f/2 1/100sec
Press the button, if have light, means it is fine and installed correctly.
ISO 220 f/2 1/100sec
Please check all the UPS in your office or home or any solar power battery. It could be explode or fire happen if you don’t change it and charging it continuously.
Buy me a drink if you this help you save some time and money.
Thank you.
Is battery main thing that fails and will not allow unit to start up
No power at is my problem on model 1500 rack style and model 900
I have an APC 1000 smart and am looking for a schematic as i want to convert it to a demand 110 volt power source without using 110 volt connection.